王开

王开，1976年生，博士，重庆大学材料成形与控制系副教授、研究生导师。2000年、2003年、2008年分别在重庆大学获得学士、硕士、博士学位，2004年在重庆大学留校任教。2009-2012在中国科学院金属研究所从事博士后工作，2013-2014在加拿大麦克马斯特从事访问博士后工作。一直从事金属、复合材料制备及加工成形的教学与科研工作、主要研究方向为先进合金及其制备加工技术。曾获省部级科技进步二、三等奖各一次，主持并参与国家自然科学基金4项、国家863项目1项及重庆市科技攻关1项等国家和省部级项目。在Acta Materialia、Scripta Materialia、Journal of Materials processing and technology、Journal of Alloys and Compound、Metallurgical and Materials Transactions A、Journal of material science 等期刊上发表学术论文40余篇，其中SCI/EI收录20余篇，申请发明专利15项，其中授权12项。

1.大变形空心轴制备过程微观结构控制技术及基础产业化应用研究，企业合作项目，主持。

2. 大尺寸铝合金低压铸造件组织致密化关键技术研究，重庆市技术创新与应用发展专项面上项目，主持。

3. 高强铝合金半固态变形失稳的调控机制及微观结构致密化行为研究，国家自然科学基金项目，主持。

4. 半固态成形用高强铝合金及组织结构调控机制研究，重点实验室开放基金，主持。

5. 4×4全地形车用铝合金连接器制备技术及产业化应用，企业合作项目，主持。

一、论文

[1] Hong-xu Li, Kai Wang*, Rong Luo, Zi-zong Zhu, Shuai Deng, Rong Luo, Jing-yi Zhang, Fei-song Fang. Influence of radial forging process on strain inhomogeneity of hollow gear shaft using finite element method and orthogonal design. Journal of Central South University, 2020, 27: 1666–1677. Online

[2] Yang Song , Zhiming Zhang , Kai Wang*, Hongxu Li, Zizong Zhu. Effects of Extrusion Processing on Microstructure of 7075Al Alloy in the Semi-solid State, Journal of Wuhan University of Technology-Mater. Sci. Ed., 2019, 34(6): 1433–1443.

[3] Kai Wang*, Tao YU, Yang SONG, Hongxu LI, Mengdi LIU, Rong LUO, Jingyu ZHANG, Feisong FANG, Xuedong LIN. Effects of MnS inclusions on the banded microstructure in non-quenched and tempered steel. Metallurgical and Materials Transactions B, 2019, 50(3): 1213-1224.

[4] HamidAzizi*, Hatem S.Zurob, David Embury, Xiang Wang, Kai Wang, Bipasha Bose. Using architectured materials to control localized shear fracture, Acta Materialia, 2018, 143 (15): 298-305.

[5] Wang, K.*, Z.M. Zhang, H. Wen, D. Xia, W.J. Sun. Microstructural evolution of a fine-grained 7075Al alloy processed by friction stir process during partial remelting. Materials Characterization, 2016, 121: 1-8.

[6] K. Wang*, Z. M. Zhang, T. Yu, N. J. He, Z. Z. Zhu, The transfer behavior in centrifugal casting of SiCp/Al composites, Journal of Materials Processing Technology, 2017, 242: 60–67

[7] Wang K., Liu F. C., Xue P., Wang D., B. L. Xiao, Z. Y. Ma*, Superplastic constitutive equation including percentage of high-angle grain boundaries as a microstructural parameter, Metallurgical and Materials Transactions A, 2016, 47(1): 546-559

[8] Kai Wang*, Tao Jiang, Zhili Huang, Hansong Xue, Dazhuang Yang, Zizong Zhu. Mechanical and thermal expansion properties of SiCp/ZAlSi9Mg composites produced by centrifugal casting, Journal of Wuhan University of Technology-Materials Science Edition, 2016, 31(1): 197-203

[9] Wang K. , Liu F. C., Xue P., Xiao B. L., Ma Z. Y.*, Effects of heating rates on microstructure and superplastic behavior of friction stir processed 7075 aluminum alloy, Journal of Materials Science, 2015, 50 (2): 1006-1015

[10] Wang K. *, Cheng J. F., Sun W. J., Xue H. S., An approach for increase of reinforcement content in particle rich zone of centrifugally cast SiCP/Al composites, Journal of Composite Materials, 2011, 46(9): 1021-1027

[11] Wang Kai *, Sun Wenjv, Li Bo, Xue Hansong, Liu Changming, Microstructures in Centrifugal Casting of SiCp/AlSi9Mg Composites with Different Mould Rotation Speeds, Journal of Wuhan University of Technology (Materials Science Edition), 2011, 26(3): 504-509

[12] K. Wang, F. C. Liu, Z. Y. Ma*, Realization of exceptionally high elongation at high strain rate in a friction stir processed Al–Zn–Mg–Cu alloy with the presence of liquid phase, Scripta Materialia, 2011, 64(6): 572-575

[13] Wang Kai *, Liu Changming, Zhai Yanbo, Zou Maohua. Microstructural characteristics of near-liquidus cast AZ91D alloy during semi-solid die casting, Transactions of Nonferrous Metals Society of China, 2010, 20(2):171-177

[14] Wang Kai *, Xue Hansong, Zou Maohua, Liu Changming. Microstructural characteristics and properties in centrifugal casting of SiCp/Zl104 composite, Transactions of Nonferrous Metals Society of China, 2009, 19(6):1410-1415

[15] Wang Kai *, Liu ChangMing, Zou MaoHua, Han ZhaoTang. Microstructure evolution of components of ZAlSi8Cu3Fe alloy in processing of thixo-diecasting, Transactions of Nonferrous Metals Society of China, 2008, 18(1):109-115

[16] T. Jiang，K. Wang*，Z. M. Zhang，W. Fan，Y. Zeng，Finite element analysis of laser beam-welded butt joints, Materials Science and Technology, 2016, 32(12): 1264-1270

[17] Jiang, T., Wang, K.*, Xia, D., Huang, Z. L., Liu, M. X., Fan, W., Zeng, Y., Microstructures and Mechanical Properties of Disk Laser Butt Welded Galvanized Steel Sheets, Lasers in Engineering, 2016, 33(4-6), 293-303

[18] HUANG Z. L., WANG K.*, ZHANG Z. M., LI B., XUE H. S., YANG D. Z., Effects of Mg content on primary Mg2Si phase in hypereutectic Al–Si alloys, Transactions of Nonferrous Metals Society of China, 2015, 25(15): 3197–3203

[19]  Liu M.X., Wang K.*, Xia D., Jiang T., Phase field simulation of Al–Si binary dendritic growth and micro-segregation patterns under convection, Journal of Alloys and Compounds, 2014, 589 (15): 431-435

二、专利

[1] 王开，张峰华，李莎，丁蓉蓉，杨大壮，赵建华，谢卫东，一种用于重力铸造合金临界凝固系数检测的装置和方法，2017.10.10，中国，ZL201510577326.5(授权)

[2] 王开，郭刚印，赵凯阳，徐慧，夏伟，高亮，陈佳，杨培江，一种用于低压铸造合金临界凝固系数检测的装置和方法，2017.10.10，中国，ZL201510577326.5(授权)

[3] 王开，薛寒松，肖海波，何乃军，轩伟，刘昌明，摩擦搅拌加工技术在高硅铝合金缸套的应用方法，2011.3.16，中国，ZL 200910191345.9(授权)

[4] 王开，孙文菊，黄笑宇，林雪冬，陈秀丽，刘昌明，杨勇，颗粒增强复合材料浆料质量的快速检测方法，2012.06.27，中国，ZL 201010178537.9(授权)

[5] 王开，黄笑宇，轩伟，李波，薛寒松，杨勇，刘昌明，半固态真空热压制备颗粒增强镁合金复合材料的方法，2011.11.23，中国，ZL 201010292488.1(授权)

[6] 王开，薛寒松，刘昌明，何乃军，谢卫东， 邹茂华，用振动加速沉降技术制备SiCp/Al电子封装零件的方法，2011.11.23，中国，ZL200910104244.3(授权)

[7] 王开，肖海波，邹茂华，黄笑宇，何乃军，刘昌明，半固态铸造技术制备局部颗粒增强铝合金气缸套的方法， 2011. 6.29，中国，ZL 200910191999.1(授权)

王开（5/10），汽车缸盖用高性能铸造铝合金材料关键技术研发，中国汽车工程学会，中国汽车工业科学技术进步奖，二等奖，2017年