[1] Ma S, Tang Q, Han X, et al. Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting, Materials and Design, 2020, 195: 109034.

[2] Song J, Tang Q, Feng Q, et al. Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting[J]. Optics & Laser Technology, 2019, 120: 105725.

[3] Ma S, Tang Q, Feng Q, et al. Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting[J]. Journal of the mechanical behavior of biomedical materials, 2019, 93: 158-169.

[4] Yan D, Kovacevic A, Tang Q, et al. Numerical modelling of twin-screw pumps based on computational fluid dynamics[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(24): 4617-4634.

[5] Feng Q, Tang Q, Liu Z, et al. An investigation of the mechanical properties of metallic lattice structures fabricated using selective laser melting[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2018, 232(10): 1719-1730.

[6] Feng Q, Tang Q, Liu Y, et al. Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(5-8): 2301-2313.

[7] Liu Z, Tang Q, Liu N, et al. A profile error compensation method in precision grinding of screw rotors[J]. The International Journal of Advanced Manufacturing Technology, 2019, 100(9-12): 2557-2567.

[8] Liu Z, Tang Q, Zhang Y F, et al. An analytical method for surface roughness prediction in precision grinding of screw rotors[J]. The International Journal of Advanced Manufacturing Technology, 2019: 1-12.

[9] Yan D, Tang Q, Kovacevic A, et al. Rotor profile design and numerical analysis of 2–3 type multiphase twin-screw pumps[J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018, 232(2): 186-202.

[10] Liu Z, Tang Q, Li X, et al. A method for thermal characteristics modelling of hob assembly on dry hobbing machine[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2019, 233(7): 2262-2274.

[11] Deng F, Tang Q, Li X, et al. Study on mapping rules and compensation methods of cutting-force-induced errors and process machining precision in gear hobbing[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(9-12): 3859-3871.