Wire-arc additive manufacturing and post-heat treatment optimization on microstructure and mechanical properties of Grade 91 steel

K. Li, M.A. Klecka, S. Chen, W. Xiong

Additive Manufacturing

2020

Grain boundary and microstructure engineering of Inconel 690 cladding on stainless-steel 316L using electron powder bed fusion additive manufacturing

K. Li, B. Yu, R.D.K. Misra, G. Han, Y.T. Tsai, C.W. Shao, C.J. Shang, J.R. Yang, Z.F. Zhang

Journal of Materials Science & Technology

2019

Effects of process parameters on microstructures and tensile properties of laser melting deposited CrMnFeCoNi high entropy alloys

S. Xiang, J. Li, H. Luan, A. Amar, S. Lu, K. Li, L. Zhang, F. Qu, W. Zhang, D. Wang, Q. Li

Materials Science and Engineering: A

2019

Characterization and mechanical properties of cladded stainless steel 316L with nuclear applications fabricated using electron beam melting

I.A. Segura, J. Mireles, L.E. Murr, K. Li, V.S.Y. Injeti, R.D.K. Misra, R.B. Wicker

Journal of Nuclear Materials

2018

Parametric modeling and performance analysis of a personalized insole based on 3D scanning and selective laser sintering

Li J, Shu W, Yang Y, et al

International Journal of Computer Integrated Manufacturing

2020

Mechanical properties of graded scaffolds developed by curve interference coupled with selective laser sintering

Li J , Zhao Z , Yan R , et al

Materials Science and Engineering C

2020

多孔支架的工艺参数优化及力学性能

李军超,赵泽,鄢然,龚鹏程

中国激光

2019

TC4多孔件选区激光熔化成形及力学性能分析

李军超,臧艳艳,王维

稀有金属材料与工程

2018

A lightweight and support-free design method for selective laser melting

Zhonghua Li, David Zhengwen Zhang, Peng Dong, Ibrahim Kucukkoc

The International Journal of Advanced Manufacturing Technology

2016

Optimising the process parameters of selective laser melting for the fabrication of Ti6Al4V alloy

Zhongfa Mao, David Z. Zhang, Peitang Wei and Kaifei Zhang

Rapid Prototyping Journal

2017

The influence of scan length on fabricating thin-walled components in selective laser melting

Zhonghua Li, Renjun Xu, Zhengwen Zhang, Ibrahim Kucukkoc

International Journal of Machine Tools and Manufacture

2018

Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting

Fei Liu, David Z. Zhang*, Peng Zhang, Miao Zhao and Salman Jafar

Materials

2018

Rolling contact fatigue performance evaluation of Ti–6Al–4V parts processed by selective laser melting

Peng Zhang, David Z. Zhang, Danhua Peng, Zhonghua Li, Zhongfa Mao.

The International Journal of Advanced Manufacturing Technology

2018

Processing optimization , mechanical properties and microstructural evolution during elective laser melting of Cu-15Sn high-tin bronze

Zhongfa Mao, David Z. Zhang, Junjie Jiang, Guang, Fu, Peng Zhang

Materials  Science &  Engineering A

2018

Finite Element Analysis of Interaction of Laser Beam with Material in Laser Metal Powder Bed Fusion Process

Guang Fu, David Z. Zhang , Allen N. He, Zhongfa Mao and Kaifei Zhang

Materials

2018

Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties.

FeiLiu, ZhongfaMao, PengZhang, David Z.Zhang, JunjieJiang, ZhiboMa

Materials & Design

2018

Study on the Geometric Design of Supports for Overhanging Structures Fabricated by Selective Laser Melting

Kaifei Zhang, Guang Fu, Peng Zhang, Zhibo Ma, Zhongfa Mao and David Z. Zhang

Materials

2018

Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM

Miao Zhao, Fei Liu , Guang Fu , David Z. Zhang , Tao Zhang and Hailun Zhou

Materials

2018

Evaluation of Low Cycle Fatigue Performance of Selective Laser Melted Titanium Alloy Ti–6Al–4V

Peng Zhang, Allen Naihui He, Fei Liu, Kaifei Zhang, Junjie Jiang, David Zhengwen Zhang

Materials

2019

A dynamic order acceptance and scheduling approach for additive manufacturing on-demand production

Qiang Li, David Z. Zhang, Shilong Wang, Ibrahim Kucukkoc

International Journal of Advanced Manufacturing Technology

2016

Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces

Miao Zhao, David Z. Zhang, Fei Liu, zhonghua li, Zhibo Ma, Zhihao Ren

International Journal of Mechanical Sciences

2020

Mechanical properties and microstructural evolution of TA15 Ti alloy processed by selective laser melting before and after annealing

Junjie Jiang, Zhihao Ren, Zhibo Ma, Tao Zhang, Peng Zhang, David Z. Zhang, Zhongfa Mao

Materials Science & Engineering A

2020

Lattice structures of Cu-Cr-Zr copper alloy by selective laser melting: Microstructures, mechanical properties and energy absorption

Zhibo Ma, David Z. Zhang, Fei Liu, Junjie Jiang, Miao Zhao, Tao Zhang

Materials & Design

2020

Sheet and network based functionally graded lattice structures manufactured by selective laser melting: Design, mechanical properties, and simulation

Hailun Zhou, Miao Zhao, Zhibo Ma, David Z. Zhang, Guang Fu

International Journal of Mechanical Sciences

2020

Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting

Ma S, Tang Q, Han X, et al.

Materials and Design

2020

Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting

Song J, Tang Q, Feng Q, et al

Optics & Laser Technology

2019

Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting

Ma S, Tang Q, Feng Q, et al

Journal of the mechanical behavior of biomedical materials

2019

An investigation of the mechanical properties of metallic lattice structures fabricated using selective laser melting

Feng Q, Tang Q, Liu Z, et al

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2018

Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting

Feng Q, Tang Q, Liu Y, et al

The International Journal of Advanced Manufacturing Technology

2018